exploreHD cameras feature hardware H.264 compression, which improves performance for multiple camera streams.

1

Install DWE_OS on your Raspberry Pi 4

2

Follow network setup guide on your desktop/laptop computer

3

Connect your cameras to your Raspberry Pi 4

Connect cameras to RPi 4 USB-Port

4

Connect ethernet cable to RPi 4

5

Connect ethernet cable to your laptop/PC

6

Turn on your RPi 4

Connect your RPi to power

7

Ensure you are able to visit DWE_OS webpage

If you configured your own IP address, visit port 5000 on your specified IP.

Visit the following webpage to access DWE_OS:

192.168.2.2:5000
8

Configure your cameras to stream video.

The address field in DWE_OS is the IP Address of the stream endpoint (the device that is viewing the video stream).

For this guide, the Raspberry Pi and Laptop/PC are assumed to be the following:

Laptop/PC192.168.2.1
Raspberry Pi 4192.168.2.2
9

Install Discovery for Desktop

Download Discovery

Click here to download Discovery for Desktop on your Laptop/PC.

After download is complete, enter the IP address (stream endpoint IP) and port of the streams you would like to receive.

10

Success!

There you go! You should have your video streams showing up from your Raspberry Pi.

Video Samples