stellarHD Technical Specifications

​

Technical Specifications

Water-Resistance Specifications

• WetLink
• SubConn MCBH8M

Depth Rating	1000m
Ingress Protection Rating	IP69K+ equivalent
Safety Margin

Physical Specifications

• Standard
• Aquagon

Mass in Air	120 grams
Weight in Water	50 grams
Material Composition	Naval-grade, Corrosion Resistant Aluminum - Dark Gray, Abrasion-Resistant, Hard-Anodized Coating
Front Port	Dome Port Scratch-Resistant Sapphire with internal AR Coating

Power Specifications

• Standard
• MJPEG

Operating Voltage
Operating Current
Operating Wattage
Minimum Wattage
Maximum Wattage

Leader-Follower Frame-Sync Specifications

Leader-Follower mode, works on all resolutions, but only at 60 FPS. To use other framerates, you will need to use an external clock signal, and Follower-Only mode.

Follower-Only Frame-Sync Specifications

This information is for users wanting to provide an external clock signal for one or multiple stellarHD cameras.

External synchronization requires cameras to be in follower-mode. Use the firmware loader program and instructions here to flash the correct firmware for your cameras.

FPS	Frequency Range	Duty Cycle	Rising Edge	Logic Level
60FPS/59.94 NTSC	60.3Hz ± 0.4	30%	50ns or less	3.3V
50FPS	50Hz ± 0.4	30%	50ns or less	3.3V
40FPS	40Hz ± 0.4	30%	50ns or less	3.3V
30FPS	30Hz ± 0.4	30%	50ns or less	3.3V
15FPS	15Hz ± 0.4	30%	50ns or less	3.3V

Frame-Sync Wiring

Wiring Guide

Check out our wiring guide for our PrecisionSync™ enabled cameras.

Pinout Specifications

Cabling used for Data Pairs, must be USB or Ethernet Grade Cables.

• Standard
• Cobalt 6-Pin
• SubConn MCBH8M

Black	Ground
Red	5V
Yellow/Green	D+ (Data Positive)
White	D- (Data Negative)

Image Sensor Specifications

• Color
• Monochrome

Image Sensor
Sensor Color
Sensor Type
Max Resolution
Max Framerate
Color Channels
Bits Per Channel
Compression Formats
Connection	USB 2.0 High Speed / UVC Compliant

Resolutions and Framerates

• MJPEG
• YUY2

• 1600x1200, 1280x720, 800x600, 640x480
  • @60fps, @50fps, @40fps, @30fps, @15fps

Lens Specifications

• Standard
• AquagonSE™
• Aquagon™

Type	Fisheye
Focal Length	2.65mm
Lens Aperture	f/1.9
Minimum Focus Distance	20-30cm
Horizontal FOV (In Air)	138°
Vertical FOV (In Air)	70°
Diagonal FOV (In Air)	168°
Horizontal FOV (In Water)	~82°

Alternative Lenses Available Upon Request

​

CAD Files / Drawings

​

Updating Firmware

​

NDAA (National Defense Authorization Act) Compliance

This product is compliant with the latest applicable sections of the National Defense Authorization Act (NDAA), specifically prohibiting the use of covered telecommunications equipment and services. We are fully committed to ensuring that none of the prohibited brands or components covered by the NDAA are utilized in this product. This compliance underscores our commitment to national security and provides assurance for government procurement and use.

​

CE (Conformité Européenne)

This product is CE certified, indicating conformance with relevant European Union directives and regulations regarding health, safety, and environmental protection. This certification validates that the product meets the high standards required for sale within the European Economic Area.