> ## Documentation Index > Fetch the complete documentation index at: https://docs.dwe.ai/llms.txt > Use this file to discover all available pages before exploring further. # DeepWater Desktop Quickstart ## Overview DeepWater Desktop is the companion software for the [SVC Pro](/svc/specs/svc-pro). It receives data from the SVC Pro and attached hardware to produce 3D visuals such as: rectified images, disparity maps, and point clouds. ## Getting Started with DeepWater Desktop Download and run the `DeepWaterDesktop-{version}-{platform}` installer. If you haven't received one, contact our team at [support@dwe.ai](mailto:support@dwe.ai). ```bash theme={null} sudo apt install ./DeepWaterDesktop-{version}-Linux.deb DeepWaterDesktop # Can also be run through the Application menu ``` The installer can be run by double-clicking on it (Administrator) or by launching it through PowerShell (Administrator): ```bash theme={null} .\DeepWaterDesktop-{version}-win64.exe ``` It can be run by searching for it in the Start menu. DeepWater Desktop Start Screen

Click on the (Wi-Fi) icon. Connect to SVC

`192.168.2.2` is the default IP Address. If you changed it, make sure you input the correct address of your SVC Pro. Refer to the [SVC Pro - Getting Started Guide](/svc/guides/svc-pro/quickstart). Select the (plus) icon next server address to add a stream.

After adding a stream, the stream configuration stream should pop up on screen. Depending on your requirements, you may want to configure the stream differently. Select a depth mode, input type, and network protocol for your stream. Compare the available depth modes, input types, and network protocols. Please select the left camera (typically the Leader if in Leader-Follower mode), followed by the right camera. For modularity, the cameras do not store their positional data, so you will need to configure the sides manually. Add a Stream (USB)

Select a DWVO file from the list, then click **Start Stream** in the bottom right corner. If your recording has reversed camera inputs, check the **Swap left and right inputs** box to correct them. Add a Stream (DWVO)

Next, you can select the calibration file. By default, it will have the correct calibration selected. If you have any custom calibration files, they will also appear here.

You are all set! Once the stream initiates, DeepWater Desktop will begin processing your data. You should now see your 3D visuals—including rectified images, disparity maps, and point clouds—actively streaming in the main interface, just like the example below. If your depth map looks inverted or incorrect, stop the stream and double-check that your left and right camera inputs were assigned in the correct order.